Industrial and Agricultural Products for the Food Processing, Industrial and Farming industries

CallCall: 800-273-2464EmailEmailSearch
Green Rubber - Kennedy Ag
Flame Resistance:Complies with Flame Resistant and Electrical Resistance (Anti-Static) requirements of Australian Standard AS2660 and Methods of Test AS1180.1 OB and 13A. Meets Flame Resistant Designation "U.S. MSHA" of the US Department of Labor, Mine Safety and Health Administration.
Couplings: BITELOK NON-SKIVE ONE PIECE CRIMP
T700 (sizes 3/8" to 2").
Recommended For :Very high pressure hydraulic oil lines, in applications where the outside cover of the hose is subject to abrasion that may cause premature failure of standard hoses. The very high abrasion resistant properties of the cover, combined with the extra high working pressures and excellent impulse life when tested to SAE 100R12 test conditions, are designed to increase service life and minimize equipment downtime.
Tube: Black, oil resistant synthetic rubber. (Neoprene).
Reinforcement :Four layers of alternated, spiraled high tensile steel wire.
Cover :Black, extra abrasion resistant and oil resistant synthetic rubber. "FRAS" Flame Resistant and Anti-Static. The maximum weight loss of the cover under ISO 6945 method of test for abrasion resistance is less than 10% (less than 0.10 gms) of that allowed by DIN 20023 and EN 856. Highly visible lay line branding for easy and permanent identification. No skiving required with Bitelok T700 Series Crimp Couplings.
Temperature Range :From -40°C to +121°C (-40°F to +250°F). For water, emulsions etc.
Working Pressure :Dynamic working pressures (in systems with pressure surges or variable loads) are based on 4:1 minimum burst to working pressure safety factor. Static working pressures (in systems with constant loads without pressure spikes) are based on 3:1 minimum burst to working pressure safety factor.
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1 

Item #

Hose Size I.D. (DIN)

Hose Size I.D.

Dash Size

Min. Bend Radius

Nominal Hose O.D.

Bitelok One Piece Crimp

Add To Cart/Request Quote
H1206D N/A 10 N/A 3/8 in. N/A -06 N/A 127 mm5.0 in. N/A 20.2 mm0.80 in. N/A T700 SERIES Add To Cart
Request Quote
H1208D N/A 12 N/A 1/2 in. N/A -08 N/A 178 mm7.0 in. N/A 23.8 mm0.94 in. N/A T700 SERIES Add To Cart
Request Quote
H1212D N/A 20 N/A 3/4 in. N/A -12 N/A 240 mm9.5 in. N/A 30.7 mm1.21 in. N/A T700 SERIES Add To Cart
Request Quote
H1216D N/A 25 N/A 1 in. N/A -16 N/A 300 mm12.0 in. N/A 38 mm1.50 in. N/A T700 SERIES Add To Cart
Request Quote
H1220D N/A 32 N/A 1 1/4 in. N/A -20 N/A 400 mm16.0 in. N/A 47 mm1.85 in. N/A T700 SERIES Add To Cart
Request Quote
H1224D N/A 40 N/A 1 1/2 in. N/A -24 N/A 500 mm20.0 in. N/A 53.5 mm2.11 in. N/A T700 SERIES Add To Cart
Request Quote
H1232D N/A 50 N/A 2 in. N/A -32 N/A 600 mm24.0 in. N/A 66.7 mm2.63 in. N/A T700 SERIES Add To Cart
Request Quote
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1