Industrial and Agricultural Products for the Food Processing, Industrial and Farming industries

CallCall: 800-273-2464EmailEmailSearch
Green Rubber - Kennedy Ag
Flame Resistance : Complies with Flame Resistant and Electrical Resistance (Anti-Static) requirements of Australian Standard AS2660and Methods of Test AS 1180.1 OB and 13A. Meets Flame Resistant Designation "U.S. MSHA" of the US Department of Labor, Mine Safety and Health Administration.
Couplings : BITELOK NON-SKIVE ONE PIECE CRIMP T200 (sizes 1/4" to 1.1/4"). T700 (sizes 3/8" to 2")
FIELD ATTACHABLE L Series (sizes 1/4" to 1.1/4") refer to RYCO. B Series (sizes 1.1/2" & 2") refer to RYCO.
Recommended For : High pressure hydraulic oil lines in applications where the outside cover of the hose is subjected to abrasion that may cause premature failure of standard hoses. The very high abrasion resistant properties of the cover, combined with the high working pressures and excellent impulse life when tested to EN 853 Type 2SN / SAE 100R2AT test conditions, are designed to increase service life and minimize equipment downtime.
Tube : Black, oil resistant synthetic rubber. (Nitrile).
Reinforcement : Two braids of high tensile steel wire.
Cover : Black, extra abrasion resistant and oil resistant rubber. "FRAS" Flame Resistant and Anti-Static. The weight loss of the cover under ISO 6945 method of test for abrasion resistance is less than 10% (less than 0.05 gms) of that allowed by DIN 20022-2SN and EN 853 Type 2SN. Highly visible lay line branding for easy and permanent identification. No skiving required with Bitelok T200 & T700 Series Crimp Couplings and L Series Field Attachable Couplings.
Temperature Range : From -40°C to +100°C (-40°F to +212°F). For water, emulsions etc.
Working Pressure : Dynamic working pressures (in systems with pressure surges or variable loads) are based on 4:1 minimum burst to working pressure safety factor. Static working pressures (in systems with constant loads without pressure spikes) are based on 3:1 minimum burst to working pressure safety factor.
1 - 9 of 9 | Results Per Page | View | Unit of Measure
1 

Item #

Hose Size I.D. (DIN)

Hose Size I.D.

Dash Size

Min. Bend Radius

Average Weight

Nominal Hose O.D.

Add To Cart/Request Quote
T24D N/A 6 N/A 1/4 in. N/A -04 N/A 100 mm4.0 in. N/A 0.26 lb/ft0.39 kg/m N/A 15 mm0.59 in. Add To Cart
Request Quote
T26D N/A 10 N/A 3/8 in. N/A -06 N/A 127 mm5.0 in. N/A 0.38 lb/ft0.57 kg/m N/A 19 mm0.75 in. Add To Cart
Request Quote
T28D N/A 12 N/A 1/2 in. N/A -08 N/A 178 mm7.0 in. N/A 0.44 lb/ft0.66 kg/m N/A 22 mm0.87 in. Add To Cart
Request Quote
T210D N/A 16 N/A 5/8 in. N/A -10 N/A 200 mm8.0 in. N/A 0.54 lb/ft0.80 kg/m N/A 25.2 mm0.99 in. Add To Cart
Request Quote
T212D N/A 20 N/A 3/4 in. N/A -12 N/A 240 mm9.5 in. N/A 0.65 lb/ft0.96 kg/m N/A 29.1 mm1.15 in. Add To Cart
Request Quote
T216D N/A 25 N/A 1 in. N/A -16 N/A 300 mm12.0 in. N/A 0.92 lb/ft1.37 kg/m N/A 37.7 mm1.48 in. Add To Cart
Request Quote
T220D N/A 32 N/A 1 1/4 in. N/A -20 N/A 419 mm16.5 in. N/A 1.36 lb/ft2.03 kg/m N/A 48 mm1.89 in. Add To Cart
Request Quote
T224D N/A 40 N/A 1 1/2 in. N/A -24 N/A 500 mm20.0 in. N/A 1.85 lb/ft2.75 kg/m N/A 54.4 mm2.14 in. Add To Cart
Request Quote
T232D N/A 50 N/A 2 in. N/A -32 N/A 600 mm24.0 in. N/A 2.35 lb/ft3.50 kg/m N/A 67.3 mm2.65 in. Add To Cart
Request Quote
1 - 9 of 9 | Results Per Page | View | Unit of Measure
1