Honda Trash Pumps are specially designed for job sites and applications where high volume trash water capacity is required. Honda WT Series pumps offer highly desired features including our legendary, easy-starting and reliable OHV commercial-grade engine, rugged full frame protection, quick release clean-out, and durable silicone carbide mechanical seals. Other Honda WT features include a unique conical impeller for improved priming and durability, replaceable stainless steel wear plate for extended life, and a convenient multi-tool for on-site pump servicing and clean-out.
Unit of Measure
Specifications
Brands |
N/A Honda |
Discharge Port Diameter |
N/A 4 in |
Type |
N/A Trash Pump |
Used In |
N/A Construction |
Discharge Capacity |
N/A 433 gpm |
Maximum Pressure |
N/A 37 psi |
Engine |
N/A GX340OHV |
Displacement |
N/A 337 cm³ |
Compression Ratio |
N/A 8.0:1 |
Honda Oil Alert1 | N/A Standard |
Pump Type |
N/A Centrifugal Self-priming Trash |
Volute |
N/A Rigid Mounted Cast Iron with Stainless Wear Plate |
Impeller |
N/A Conical Cast Iron |
Mechanical Seal (Pump Case/Impeller) |
N/A Silicone Carbide/Silicone Carbide |
Priming Time at 16.4 Feet (ft) |
N/A 160 s |
Drive System |
N/A Direct |
Suction Port Diameter (National Pipe Thread (NPT)) |
N/A 4 in |
Total Head Lift |
N/A 85 ft |
Suction Head Lift |
N/A 26 ft |
Solids Handling |
N/A 1 1/16 in |
Length (L) |
N/A 28.9 in |
Width |
N/A 21.1 in |
Height |
N/A 22.2 in |
Dry Weight |
N/A 172 lb |
- 1 With Handlebar over Engine.