Application :
Discharge of dry powders under low pressure. Pneumatic transfer of dry materials and abrasive slurries.
Cover :
Black conductive SBR/NR blend - abrasion and ozone resistant.
Reinforcement :
Spiralled high tensile textile cords.
Tube :
1/4" thick black static conducting natural rubber, compounded to resist cutting by abrasive materials.
Temperature Range :
-22ºF to 176ºF
Branding :
ALFAGOMMA - ITALY T763 5 BAR (75 PSI) BULK MATERIAL DELIVERY (in green letters)
Coupling Suggestions :
Cam and groove, pin lug, short shank couplings or combination nipples attached with single bolt, double bolt, wire or band type clamps.
Excessive bending during operation may cause premature wear.
Discharge of dry powders under low pressure. Pneumatic transfer of dry materials and abrasive slurries.
Cover :
Black conductive SBR/NR blend - abrasion and ozone resistant.
Reinforcement :
Spiralled high tensile textile cords.
Tube :
1/4" thick black static conducting natural rubber, compounded to resist cutting by abrasive materials.
Temperature Range :
-22ºF to 176ºF
Branding :
ALFAGOMMA - ITALY T763 5 BAR (75 PSI) BULK MATERIAL DELIVERY (in green letters)
Coupling Suggestions :
Cam and groove, pin lug, short shank couplings or combination nipples attached with single bolt, double bolt, wire or band type clamps.
Excessive bending during operation may cause premature wear.
Unit of Measure
Specifications
Package Type |
N/A Each |
Brands |
N/A Alfagomma® |
Series |
N/A T763AA |
Tube Thickness |
N/A 1/4 in |
Tube Color |
N/A Black |
Tube Material |
N/A Natural Rubber (NR) |
Standard Length |
N/A 100 ft |
Approximate Weight |
N/A 215 lb |
Cover Color |
N/A Black |
Cover Material |
N/A Natural Rubber (NR) Styrene-Butadiene Rubber (SBR) |
Nominal Inner Diameter |
N/A 4 in101.6 mm |
Constant Working Pressure |
N/A 75 psi5 bar |
Special Colors |
N/A A = Black B = Gray C = Brown D = Wine Red E = Blue F = Purple G = Green H = Red I = Orange J = Tan K = Yellow L = White M = Silver O = Translucent |
Nominal Outer Diameter |
N/A 4.72 in120 mm |
Legend Notes |
N/A Click on question mark icons ()for additional information. |
Temperature |
N/A -22 to 176 ºF |
Application/Material Conveyed |
N/A Abrasive Slurry Transfer Dry Powder Delivery, Cement/Sand |