One-wire braid hydraulic hose
One-wire braid-reinforced Meets or exceeds SAE 100 R5
Construction :
One-wire braid-reinforced Meets or exceeds SAE 100 R5
Construction :
- Tube - Oil-resistant synthetic rubber.
- Reinforcement - One high tensile steel braid.
- Cover - Polyester textile braid.
- Couplings - Screw-type reusable non-skive type.
- Branding - ALFAGOMMA FLEXOR 5 ID …WP …MPa (…PSI) SAE 100 R5 (Sizes -04 through -12 are DOT Type AII approved and branded.)
Hose cover does not need to be removed before attaching couplings and crimp-on permanent type.
Unit of Measure
Specifications
Brands |
N/A Alfagomma® |
Nominal Inner Diameter |
N/A 7/8 in22.2 mm |
Size Code |
N/A 16 |
Maximum Working Pressure |
N/A 800 psi |
Nominal Outer Diameter |
N/A 1.24 in31.4 mm |
Approximate Weight (Per 100 Feet (ft)) |
N/A 48 lb |
Coupling Recommendations Ferrules (Two Piece) |
N/A H1200203-12 |
Temperature |
N/A -40 to 100 ºC-40 to 212 ºF |
Minimum Bend Radius |
N/A 7.48 in187 mm |
Maximum Operating Temperature |
N/A 125 ºC257 ºF |
Maximum Air Temperature1 | N/A 70 ºC160 ºF |
Application/Material Conveyed |
N/A Air brakes Engine coolant Filtration lines Fuel filters Gasoline Lube oil and fuel lines Power steering Tilt cab cylinders Transmission coolant Turbocharger oil supplies |
- 1 Operating temperatures in excess of 212 ºF (100 ºC) may materially reduce the life of the hose.