Tiger-Clamp Spiral Double Bolt Clamps are recommended for use on the Tigerflex convoluted hoses. For use on Tigerflex hoses with convoluted cover (counter-clockwise spiral only). For adequate holding power, a single clamp may be used on each end for 1 1/2" - 4" ID hose. Two clamps are recommended for each end on 5" ID hose and larger.
Use of pneumatic air tools for tightening purposes is not recommended due to potential clamp damage caused by excess torque. Both hex nuts should be tightened equally to prevent possible leakage. If sockets are used, they should be deep well sockets.
Proper evaluation of holding power for clamp must be determined for each individual installation.
Use of pneumatic air tools for tightening purposes is not recommended due to potential clamp damage caused by excess torque. Both hex nuts should be tightened equally to prevent possible leakage. If sockets are used, they should be deep well sockets.
Proper evaluation of holding power for clamp must be determined for each individual installation.
Unit of Measure
Specifications
Series |
N/A Series 2001 Series 2020 Series BW Series CG Series F Series G Series GC Series GC-C Series H Series J Series K Series PF Series S Series UBK Series W Series WBS Series WE Series WG Series WH Series WST Series WSTF Series WT Series WU UREFLEX-1 UREFLEX-2 UREVAC-3 |
Brands |
N/A Tigerflex® |
Fits Hose Inner Diameter |
N/A 1.5 in |
