Green Rubber-Kennedy AG, LP - T2D-Diehard Non-Skive Hose

Unit of Measure

Items	03RT204D 1/4 Inch (in) Hose Inner Diameter T2D-Diehard Non-Skive Hose Price per Foot {QUOTE}	03RT206D 3/8 Inch (in) Hose Inner Diameter T2D-Diehard Non-Skive Hose Price per Foot {QUOTE}	03RT208D 1/2 Inch (in) Hose Inner Diameter T2D-Diehard Non-Skive Hose Price per Foot {QUOTE}	03RT210D 5/8 Inch (in) Hose Inner Diameter T2D-Diehard Non-Skive Hose Price per Foot {QUOTE}	03RT212D 3/4 Inch (in) Hose Inner Diameter T2D-Diehard Non-Skive Hose Price per Foot {QUOTE}
Description	N/A Flame Resistance: Complies with Flame Resistant and Electrical Resistance (Anti-Static) requirements of Australian Standard AS2660and Methods of Test AS 1180.1 OB and 13A. Meets Flame Resistant Designation "U.S. MSHA" of the US Department of Labor, Mine Safety and Health Administration. Couplings: BITELOK NON-SKIVE ONE PIECE CRIMP T200 (sizes 1/4" to 1.1/4"). T700 (sizes 3/8" to 2") FIELD ATTACHABLE L Series (sizes 1/4" to 1.1/4") refer to RYCO. B Series (sizes 1.1/2" & 2") refer to RYCO.
Hose Inner Diameter (DIN)	N/A 6 mm	N/A 10 mm	N/A 12 mm	N/A 16 mm	N/A 20 mm
Hose Inner Diameter	N/A 1/4 in	N/A 3/8 in	N/A 1/2 in	N/A 5/8 in	N/A 3/4 in
Dash Size	N/A -04	N/A -06	N/A -08	N/A -10	N/A -12
Maximum Dynamic Working Pressure	N/A 420 bar6000 psi	N/A 350 bar5100 psi	N/A 350 bar5100 psi	N/A 250 bar3600 psi	N/A 215 bar3100 psi
Maximum Static Working Pressure	N/A 560 bar8000 psi	N/A 467 bar6800 psi	N/A 467 bar6800 psi	N/A 333 bar4830 psi	N/A 287 bar4130 psi
Minimum Burst Pressure	N/A 1680 bar24000 psi	N/A 1400 bar20400 psi	N/A 1400 bar20400 psi	N/A 1000 bar14500 psi	N/A 860 bar12400 psi
Minimum Bend Radius	N/A 100 mm4.0 in	N/A 127 mm5.0 in	N/A 178 mm7.0 in	N/A 200 mm8.0 in	N/A 240 mm9.5 in
Average Weight	N/A 0.39 kg/m0.26 lb/ft	N/A 0.57 kg/m0.38 lb/ft	N/A 0.66 kg/m0.44 lb/ft	N/A 0.80 kg/m0.54 lb/ft	N/A 0.96 kg/m0.65 lb/ft
Nominal Hose Outer Diameter	N/A 15 mm0.59 in	N/A 19 mm0.75 in	N/A 22 mm0.87 in	N/A 25.2 mm0.99 in	N/A 29.1 mm1.15 in
Field Attachable L (& B) Series Insert	N/A 600 Series
Field Attachable L (& B) Series Ferrule	N/A L00-04	N/A L00-06	N/A L00-08	N/A L00-10	N/A L00-12
Bitelok One Piece Crimp	N/A T200	N/A T200 T700	N/A T200 T700	N/A T200	N/A T200 T700
Temperature¹	N/A -40 to 100 ºC-40 to 212 ºF
Reinforcement	N/A Two braids of high tensile steel wire.
Tube Color	N/A Black
Tube Material	N/A Oil-Resistant Synthetic Rubber (Nitrile)
Cover Color	N/A Black
Cover Material	N/A Extra Abrasion and Oil resistant Rubber
Note for Cover	N/A "FRAS" Flame Resistant and Anti-Static. The weight loss of the cover under ISO 6945 method of test for abrasion resistance is less than 10% (less than 0.05 gms) of that allowed by DIN 20022-2SN and EN 853 Type 2SN. Highly visible lay line branding for easy and permanent identification. No skiving required with Bitelok T200 & T700 Series Crimp Couplings and L Series Field Attachable Couplings.
Working Pressure	N/A Dynamic working pressures (in systems with pressure surges or variable loads) are based on 4:1 minimum burst to working pressure safety factor. Static working pressures (in systems with constant loads without pressure spikes) are based on 3:1 minimum burst to working pressure safety factor.
Recommended for	N/A High pressure hydraulic oil lines in applications where the outside cover of the hose is subjected to abrasion that may cause premature failure of standard hoses. The very high abrasion resistant properties of the cover, combined with the high working pressures and excellent impulse life when tested to EN 853 Type 2SN/SAE 100R2AT test conditions, are designed to increase service life and minimize equipment downtime.
Vendor Identification Number	N/A
¹ For water, emulsions etc.